Start a Project

What Is a Check Measure?

Measure and quote vs check measure

  • Measure and quote: sizes good enough to price the job. Estimates are fine here.
  • Check measure: sizes good enough to make the product. Every size is measured with a tape or laser and recorded as checked.

What to check at each opening or run

  • Width at three points and height or drop at three points
  • Depth, reveal or recess, and sill height where it matters
  • Both diagonals where squareness matters (shutters, joinery, benchtops)
  • Obstructions: handles, winders, sensors, tiles, power points, pipes, vents
  • Fixing surface and anything behind it
  • Finished floor level, or the planned floor finish
  • Access for delivery and installation
  • A photo with the size drawn on
  • Status: checked with tape, checked with laser, or still needs checking

How to record a check measure in Measure Genie

  1. Open the job from the first visit. Earlier sizes are still there with their source: Voice entry, Manual entry, AR estimate or LiDAR scan.
  2. Re-measure each one with your tape.
  3. Open the saved measurement, correct the size if it changed, then set Verification to Checked with tape (or Checked with laser if you used one). On iPhone it's the Verification menu; on Android the four options are buttons.
  4. Leave anything you could not confirm as Needs checking and add a note saying why.
  5. Add new photos and mark them up.
  6. Create the site report so the customer and workroom see the checked sizes.
Measure Genie measurement detail on iPhone for Kitchen Window 1, 2100 x 1100 mm from an AR estimate, with the Verification menu open: Needs checking, Checked, Checked with tape, Checked with laser
Verification menu on iPhone

Show the customer which sizes were checked with a tape before anything is ordered.

Download Measure Genie on the App Store
Google Play

Sample report: a check measure in a branded site measurement report

In the Mitchell Residence sample, the report's Measurements table lists nine sizes. Each row shows the item, room, size, source and verification. Door 1 in the Living Room reads Manual entry and Checked with tape. Window 1 in the Kitchen reads AR estimate and Needs checking, and carries "est." because it hasn't been checked. A legend explains that camera (AR) sizes should be checked with a tape or laser before ordering. That is exactly what a check measure should leave behind: a clear line between numbers you can order from and numbers you can't.

Page 1 of a branded site measurement report PDF for the Mitchell Residence sample by Wavelle Blinds & Shutters: the Measurements table shows Kitchen Window 1 at 2100 x 1100 mm marked Estimate, a Living Room window marked est., and a footer with the page number, Ref and date
Report PDF, page 1: Kitchen Window 1 at 2100 x 1100 mm marked Estimate, an “est.” size and the Page, Ref and date footer

Who does check measures

  • Blinds, curtains and shutters: after the customer accepts the quote and before ordering.
  • Kitchens and joinery: after walls are lined and, for benchtops, once cabinets are in.
  • Flooring: before ordering, once the subfloor and doorways are final.
  • Windows and doors: before ordering replacements.

Checked sizes, clearly marked

Record each size, mark it Checked with tape, and send a branded report that shows what was confirmed.

Download Measure Genie on the App Store
Google Play

Fitting out a team? Talk to us about setup

Create site report on iPhone with customer name and contact, Photos, Measurements and Notes switched on, Wavelle Blinds & Shutters branding, a report preview for the Mitchell Residence and the Generate preview button

Frequently asked
questions

What is a check measure?

A visit by the supplier or installer to confirm every size on site before the product is made or ordered.

Is a check measure the same as a measure and quote?

No. A measure and quote prices the job. A check measure confirms the sizes the product will be made to.

Can a phone app do a check measure?

An app can record and report it. Measure each size with a tape or laser, then mark it as checked. AR and LiDAR sizes are estimates.

What is a field measure?

The common US term for measuring on site. A final field measure before ordering does the same job as a check measure.

How do I show the customer what was checked?

Send a report that shows each size's verification status. Measure Genie's site report has a Verification column for every size.