What goes on a blinds measuring sheet?
Room and window label, product, inside or outside fit, three widths, three drops, recess depth, obstructions, control side, a photo and whether the size was checked.

| Field | What to record | Why |
|---|---|---|
| Room and window label | Living Room, Window 1 | The workroom and installer find the right opening |
| Product | Roller, Roman, Venetian, vertical, shutter, curtain | Different products need different sizes |
| Fit | Inside (recess) or outside (face fit) | Decides which width and drop you order |
| Width | Top, middle and bottom | Openings are rarely square; inside fits usually go by the smallest |
| Drop (height) | Left, centre and right | Same reason |
| Recess depth | Depth to the glass or the first obstruction | Checks the product fits inside the recess |
| Diagonals (shutters) | Both diagonals | Shows whether the opening is out of square |
| Obstructions | Handles, winders, tiled sills, alarm sensors, air conditioners | The cause of most remakes |
| Control side and stack | Left or right; stack direction | Avoids a reorder over a chain on the wrong side |
| Photo | A photo with the size drawn on | Proof of what was measured |
| Checked? | Estimate, or checked with a tape | Order only from checked sizes |
Follow your supplier's own deduction rules. They vary by product and maker, so the sheet should record the actual opening and leave deductions to the order.
At the end of the visit, the sheet becomes one PDF:
Share it with the customer or workroom from site. On iPhone you can also choose whether photos, measurements and notes go in and preview the report first.

A printed sheet still works as a backup when a phone is flat. Use the same column order as the table above so the paper and app versions read the same way.
Record every window by room, mark what you checked with a tape, and send the branded report before you leave.
Fitting out a team? Talk to us about setup

Room and window label, product, inside or outside fit, three widths, three drops, recess depth, obstructions, control side, a photo and whether the size was checked.
Openings are rarely square. For an inside fit, the smallest width usually decides the order size.
Mostly for shutters. Two different diagonals show the opening is out of square, which changes how the frame is made.
Record the actual opening. Deductions depend on the product and supplier, so apply them when you order.
Yes. In Measure Genie the sheet becomes a branded PDF site measurement report you can share from your phone.